Figure 9-18.V method of loading.
Figure 9-15.Dozer blade tilt positions.
Figure 9-16.Multipurpose bucket set in clamshell position.
blade. This is done by tilting the blade forward or
backward, as shown in figure 9-15.
To use the multipurpose bucket as a clamshell, you
open the clamshell until the clamshell indicator is at the
bottom (fig. 9-16). Then you tilt the bucket forward all
NOTE: Multipurpose bucket position indicators
differ, depending on the manufacturer. Read the
operators manual for the type loader you are assigned
Figure 9-17.Ramp construction for belowground excavation.