• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
20. Install woodruff key (15) into camshaft (10).
33. Install fresh water cooling system pump drive gear. (WP 0148)

TECHNICAL MANUAL FIELD AND SUSTAINMENT MAINTENANCE MANUAL FOR ENGINE 8V92TA
Page Navigation
  317    318    319    320    321  322  323    324    325    326    327  
img
TM 55-2815-574-24
0063
INSTALL ­ Continued
27. Position two retainers (3 and 7) on cam shaft gears (4 and 8).
4
3
9
2
1
7
8
5
6
28. Position two adaptors (2 and 6) on retainers (3 and 7).
29. Install eight screws (1 and 5) securing adaptors and retainers to cam gear.
30. Using torque wrench, torque screws (1 and 5) to 480 ft lbs (54 N-m).
NOTE
If measurement exceeds specified limits, the camshaft (10) must be replaced.
31. Using a feeler gauge verify the clearance between thrust washer (28) and the shoulder of the camshaft (10) is
between 0.004 in. to 0.018 in.
28
10
0063-13


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.