TEST - Continued
Sealing compound may cause irritation to the eyes or skin. Use in well-ventilated area. Wear protective goggles
and clothing. In case sealing compound comes in contact with:
ˇEyes, flush immediately with water.
ˇSkin, wash with soap and water.
Failure to comply may result in personnel injury.
The following steps are for testing only. New components will be installed during assembly.
90. Coat two seal rings (57) with lubricating oil.
91. Install two seal rings (57) in grooves (52) of each cylinder (51) in engine block (4).
92. Install cylinder liner inserts (58) into each cylinder (51) recess.
93. Install eight cylinder liners (59).