TM 55-2815-574-24
0043
TEST - Continued
94. Install eight compression gaskets (60).
64
61
63
51
4
60
62
95. Install oil hole seals (61) and water hole seals (62) in 34 counterbored holes (63) on each side of engine block (4).
96. Install four shims (64), one at each end of cylinder head contact surface of each side of engine block (4).
97. Install water inlet cover plate with new gasket (65) with four hex head screws (66), with lock washers (67).
4
65
RIGHT SIDE
67
66
WATER INLET
COVER PLATE
98. Install engine block pressure test core plug and gasket in the hole for the aftercooler water inlet adaptor (36) using
core plug remover/installer.
0043-28
