AIR INTAKE HOUSING REPAIR
Tools and Special Tools
General mechanic's tool kit
Industrial goggles (WP 0179, Table 1, Item 54)
Propulsion module ventilated
Stencil brush (soft bristle)
Engine cool to touch
Single channel ground and airborne radio system
(TM 11-5820-890-10-8) Main
navigation mast removed (TM
Ball and roller bearing grease
Operator's cab removed (TM 55-1925-205-10)
Intake plenum removed (TM 55-1925-205-10)
Powered section engine hatch removed
Lockwasher Qty: 6 (WP 0180, Table 1, Item 106)
Marker tags, with metal eyelet patch Qty: 2
Remove all jewelry before conducting maintenance. Do not wear watches, rings,
identification tags, or other jewelry which could short across electrical components or catch
on vehicle components. Failure to comply may result in personnel injury or death.
Place A3 breaker switch (Figure 1, Item 1), located on A10 panel, in OFF position. Refer to
TM 55-1925-205-10 for breaker location.
Before attempting any maintenance, ensure power supply (switches, circuit breakers, etc.)
has been disconnected and locked/tagged out against unauthorized accidental start-up or
else death or serious injury due to electric shock and/or moving machinery could occur.
Lock Out/Tag Out (LO/TO) A3 breaker switch (Figure 1, Item 1). Refer to FM 4-01.502 for LO/TO procedure.