REMOVAL - Continued
Figure 1. Blower.
END OF TASK
Sealing compound may cause irritation to the eyes or skin. Use in well-ventilated area.
Wear protective goggles and clothing. In case sealing compound comes in contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury.
Using adhesive spray, apply to one side of new blower gasket (Figure 1, Item 8).
Apply adhesive spray carefully to block (Figure 1, Item 9) gasket area.
Let adhesive set on gasket (Figure 1, Item 8) and block (Figure 1, Item 9) until tacky.
Install gasket (Figure 1, Item 8) on block (Figure 1, Item 9).