Tools and Special Tools
Tools and Special Tools (cont.)
General mechanic's tool kit
Valv(e guide cleaning brush
Industrial goggles (WP 0179, Table 1, Item 54)
Wire scratch brush (WP 0179, Table 1, Item 21)
Spring resiliency tester
Valve face grinding machine
Compound may cause irritation to eyes or skin. In case compound comes in contact with
eyes or skin, immediately flush eyes with water, wash skin with soap and water. Wear
protective goggles, gloves, and clothing. Failure to comply may result in personnel injury
Using cleaning cloth and cleaning compound, clean debris from valve lock (Figure 1, Item 1), spring cap
(Figure 1, Item 2), valve spring (Figure 1, Item 3), spring seat (Figure 1, Item 4), and valve stem
(Figure 1, Item 5).
Do not exceed 40 PSI (280 kPa) when using compressed air for drying components.
Failure to comply may result in serious injury to personnel.
Dry all metal components using compressed air.
Clean any carbon deposit from valve stems (Figure 1, Item 5) with wire brush and wash in cleaning
Dry valve stems (Figure 1, Item 5) using compressed air.