TM 55-2815-574-24
0069
ASSEMBLE Continued
7. Position the other bearing cup (8), number side down, on the idler gear (4).
WARNING
Keep hands, fingers and clothing away from Arbor Press moving parts. Wear
protective goggles. Failure to comply may result in personnel injury.
8.
Using an arbor press, install the bearing cup (8) into the idler gear (4).
9.
Remove idler gear (4) from arbor press.
WARNING
Fuel/Oil may cause irritation to eyes or skin. Wear protective goggles, gloves, and clothing.
Failure to comply may result in personnel injury or death.
10. Lubricate idler gear hub (5) with lubricating oil.
6
5
11. Support idler gear hub (5) with steel blocks provided with the arbor press.
12. Lubricate both bearings (6) with lubricating oil.
13. Place one of the bearings (6), numbered side up, on the hub (5).
14. Using an arbor press, install bearing (6) on hub (5) until bearing (6) is flush with hub (5).
15. Turn hub (5) and bearing (6) over.
6
4
7
5
6
0069-5