TM 55-2815-574-24
0071
ASSEMBLY
1.
Support flywheel (Figure 2, Item 2), ring step side up, and ring gear (Figure 2, Item 1) on metal surface.
WARNING
Ring gear will be extremely hot, use caution when handling. Failure to comply may result in
personnel injury.
2.
Using torch set and heat protective mittens, flash heat ring gear (Figure 2, Item 1) uniformly.
3.
Using blacksmith's tongs, place ring gear (Figure 2, Item 1) over flywheel (Figure 2, Item 2) with chamfer on
ring gear facing correct direction.
4.
Using ball peen hammer, tap ring gear (Figure 2, Item 1) onto flywheel (Figure 2, Item 2) ensuring ring gear
is completely seated on flywheel.
Figure 2. Flywheel Ring.
END OF TASK
END OF WORK PACKAGE