TM 55-2815-574-24
0131
REMOVAL - Continued
3.
Tag and disconnect two wires (Figure 2, Item 3) from oil pressure sending unit (Figure 2, Item 2).
4.
Position drain pan under sending unit (Figure 2, Item 2).
WARNING
Do not allow any oil to drip onto deck. Failure to comply may result in injury to personnel.
5.
Remove oil pressure sending unit (Figure 2, Item 2) from street elbow (Figure 2, Item 1).
Discard sending unit.
END OF TASK
INSTALLATION
1.
Wrap new oil pressure sending unit (Figure 2, Item 2) threads with antiseizing tape.
2.
Install new oil pressure sending unit (Figure 2, Item 2) into street elbow (Figure 2, Item 1).
3.
Remove drain pan and dispose of contents in accordance with local procedures.
4.
Observing tags, connect two wires (Figure 2, Item 3) to oil pressure sending unit (Figure 2, Item 2).
5.
Remove tags from wires (Figure 2, Item 3).
Figure 2. Oil Pressure Sending Unit.