Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
Chapter 1-Programs, Reports, and Records
Environmental Pollution Control Program
Monitor Program Operations
Sample lesson plan -Cont.
Sample lesson plan-Cont. - 14111_15
Sample lesson plan-Cont. - 14111_16
Sample lesson plan-Cont. - 14111_17
Hazardous Material Spill Response Drill Scenarios
Response drill scenarios
Spill drill for gasoline
Engineering Operational Casualty Control (EOCC) Manuals
Spill drill for oil
Spill drill for oil-Cont.
Spill drill for freon
EOCC Verification Checks
Using the Feedback System
Routine Feedbacks
Prepare Full Power and Economy Trail Reports
Marine Gas Turbine Equipment Logbooks
Engineering trail report transmittal letter
Figure 1-7.Engineering trial report data, sheet 1 of 2.
Figure 1-8.Engineering trial report data, sheet 2 of 2.
Figure 1-9.Propulsion plant condition report.
Review MGTE Log Books (MGTEL)
Update WHB Operating records
Sample BIRMIS report.
Sample BIRMIS reportContinued. - 14111_37
Sample BIRMIS reportContinued. - 14111_38
Boiler water chemistry check sheets.
Feedwater chemistry check sheets.
Figure 1-13.Handout #l for sample lesson plan.
Figure 1-13.Handout #l for sample lesson planContinued.
Figure 1-13.Handout #1 for sample lesson planContinued.
Figure 1-13.Handout #l for sample lesson planConthmed.
Chapter 2 Gas Turbine Maintenance
General Inspection Procedures
Geometric Orientation of the Engine
Borescope Ports
Compressor
Indexing and Rotating the Engine
Figure 2-7.Borescope inspection ports.
Figure 2-8.Engine turning locations for borescope inspections.
Service Limits
Figure 2-10.Zero indexing the compressor rotor.
Figure 2-12.Compressor blade leaners.
Figure 2-13.Compressor rotor blade tip clang damage.
Figure 2-14.Platform fretting or shingling.
Figure 2-16.Compressor blade midspan shroud wear.
Combustion Section
Figure 2-19.Combustion liner dome band and plate cracks.
Figure 2-21.Combustion liner dome igniter tube.
Figure 2-23.Combustor inner liner cracks.
Figure 2-25.Inner/outer liner burns and missing metal.
HP Turbine
HP Turbine Blade Damage
Figure 2-26.HP turbine blade flaking and buildup.
HP Turbine Blade Failure Modes
Power Turbine
Evaluating Physical Size
Troubleshooting Techniques
ECSS Troubleshooting Procedures
Component Changeout
LM2500 Engine Changeout
Coordination
GTG Engine Changeout
Maintenance Tips
VSV Scheduling
Corrosion
Figure 2-32.Simplified corrosion cell
Types of Corrosion
Intergranular Corrosion
Prevention and Control
Preservation and Packaging for Storage
Table 2-1a.LM2500 Condition Codes
Table 2-1b.LM2500 Condition Codes (Cont'd)
Table 2-1c.LM2500 Condition Codes (Cont'd)
Table 2-1d.LM2500 Condition Codes (Cont'd)
Figure 2-11a.Engine inspection nomenclature
Figure 2-11b.Engine inspection nomenclature
Chapter 3 - Power Train and Propulsion Systems
Figure 3-1.Gear tooth nomenclature
Tooth Wear and Failure
Figure 3-2.Progressive destructive pitting
Figure 3-4.Broken tooth
Main Thrust Bearing Clearance Measurements
Figure 3-6.Thrust bearing and housing
Clutch and Brake Assemblies
Maintenance of Equipment and Components
Troubleshooting
Propulsion Systems
CRP/CPP Systems Operations
Figure 3-9.Emergency pitch arrangement
Electronic Pitch Indicator System
Figure 3-11.Hub-mounted electronic pitch position transducer.
Emergency Operation
Electrohydraulic Servo Valve
Alignments and Adjustments
Removal and Replacement of Components
Appendix 1- References used to Develop the Traman
Appendix 1-Cont. - 14111_114
Appendix 1-Cont. - 14111_115
Index - 14111_117
Index Cont.
Assignment Questions - 14111_119
Assignment 1 - 14111_121
Assignment 1 Cont. - 14111_122
Assignment 1 Cont. - 14111_123
Assignment 1 Cont. - 14111_124
Assignment 1 Cont. - 14111_125
Assignment 1 Cont. - 14111_126
Assignment 1 Cont. - 14111_127
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
