TM 55-2815-574-24
0091
REMOVE - Continued
CAUTION
Cylinder head injector hole must be covered to keep out foreign matter.
5.
Cover injector hole (9) with clean, lint free cloth.
END OF TASK
CLEAN
WARNING
Cleaning compound may cause irritation to the eyes or skin. Use in well-ventilated areas.
Wear protective goggles and clothing. In case cleaning compound comes in contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury.
1.
Clean exterior surface of injector (8) with cleaner.
WARNING
Do not exceed 40 psi (279.79 kPa) when using compressed air for drying components.
Failure to comply could result in injury to personnel.
2.
Dry injector using compressed air.
WARNING
Fuel/Oil may cause irritation to eyes or skin. Wear protective goggles, gloves, and clothing.
Failure to comply may result in personnel injury or death.
3.
Pack reamer with grease.
4. Remove any carbon deposits from cylinder head injector tube beveled seat (10) using injector tube bevel reamer
or equivalent.
END OF TASK
0091-3
