TM 55-2815-574-24
0032
REMOVAL - Continued
Figure 5. Engine Junction Box Removal.
13.
Position drain pan beneath fuel supply line check valve (Figure 6, Item 3) located near the forward starboard
end of engine.
WARNING
Fuel is flammable and should not be exposed to open flame. Always keep fire
extinguisher within easy reach when working with fuel.
Fuel is toxic and may cause irritation to the eyes, lungs, or skin. Always wear eye
and hand protection, and ensure that you are in a well-ventilated area when
handling fuel.
Fuel is slippery and may cause falls. Mop up spills immediately.
Fuel is an environmental hazard. Accidental or intentional introduction of liquid
contaminants into the environment may result in a violation of state, federal, and
military regulations. Refer to local environmental office for information concerning
storage, use, and disposal of these liquids.
Failure to comply may result in personnel injury, death, and/or damage to equipment and
environment.
14.
Remove fuel primer pump supply line (Figure 6, Item 1) from fuel supply line check valve
(Figure 6, Item 3).
15.
Remove fuel pump supply line (Figure 6, Item 2) from fuel supply line check valve (Figure 6, Item 3).
NOTE
The main fuel supply line with attached check valve will remain in the bilge and will not
interfere with engine removal.
16.
Secure two fuel supply lines (Figure 6, Items 1 and 2) to engine with twine.
