TM 55-2815-574-24
0137
INSTALLATION - Continued
WARNING
Accidental or intentional introduction of liquid contaminants into the environment
may result in a violation of state, federal, and military regulations. Refer to local
environmental office for information concerning storage, use, and disposal of
these liquids. Failure to comply may cause damage to environmental and health
of personnel. Seek medical attention in the event of injury.
Fuel/solvent/oil is slippery and may cause falls. Wipe up spillage immediately with
rags. Dispose of materials in accordance with local hazardous waste disposal
procedures. Failure to comply may result in personnel injury or death and/or
damage to equipment.
17.
Clean up spilled fluid with spill clean-up kit and dispose of spill clean-up kit waste in accordance with local
procedure.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install fresh water cooling system filter (WP 0136).
2.
Start engine (TM 55-1925-205-10).
3.
Check coolant filter head for leaks (TM 55-1925-205-10).
4.
Shut engine down (TM 55-1925-205-10).
5.
Service cooling system (TM 55-1925-205-10).
END OF TASK
END OF WORK PACKAGE
0137-5/blank