TM 55-2815-574-24
0043
TEST - Continued
INLET ADAPTER
CORE PLUG
AND
GASKET
36
4
99. Torque engine block pressure test core plug to 230 270 ft lbs (311 366 N-m) using torque wrench.
WARNING
Accidental or intentional introduction of liquid contaminants into the environment may result in a violation
of state, federal, and military regulations. Refer to local environmental office for information concerning
storage, use, and disposal of these liquids. Failure to comply may cause damage to environment and health
of personnel. Seek medical attention in the event of injury.
Fuel/solvent/oil is slippery and may cause falls. Wipe up spillage immediately with rags. Dispose of
materials in accordance with local hazardous waste disposal procedures. Failure to comply may result in
personnel injury or death.
Oils and fluids are flammable and may cause irritation to the eyes or skin. Use in well-ventilated areas and
keep away from heat and open flame. Wear protective goggles and clothing. In case oil or fluid comes in
contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury or death.
100. Pour one gallon of antifreeze into engine block water jacket fitting (68).
0043-29