• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Assignment 6, Continued - 14081_595
Assignment 6, Continued - 14081_597

Equipment Operator Basic - Beginning construction equipment operators manual
Page Navigation
  566    567    568    569    570  571  572    573    574    575    576  
6-40. What  is  the  maximum  travel  speed when towing the 4K forklift? 1. 55 mph 2. 45 mph 3. 35 mph 4. 25 mph 6-41. What component on the 6K RT forklift  allows  the  rotation of  the  forklift  frame  about its  longitudinal  axis? 1. Articulating  hydraulic  cylinder 2. Longitudinal  hydraulic  cylinder 3. Oscillating  hydraulic  cylinder 4. Directional  hydraulic  cylinder 6-42. The  inching  pedal  on  the  lift–king forklift should be used as a clutch pedal  during  normal  operations. 1. True 2. False 6-43. The lift interrupt device on the lift–king  forklift  prevents  the forks  from  being  raised  above  what maximum  height? 1. 43 inches 2. 60 inches 3. 96 inches 4. 120 inches 6-44. What is the purpose of sealing the exhaust  pipe  when  transporting  the lift-king  forklift  on  a  tractor– trailer? 1. Prevents  rainwater  from entering  the  engine 2. Prevents  insects  from entering  the  engine 3. Prevents  autorotation  of the  turbocharger  turbine 4. Prevents  vandals  from sabotaging  the  engine 6-45. A  forklift  attachment  may  reduce the capacity of the forklift by changing  the  center  of  gravity of  the  load. 6-46. Which of the following forklift attachments  is  used  when  handling Air  Force  463–L  pallets? 1. Crane  boom 2. Pallet  handling 3. Drum  handling 4. Fork  extension Learning  Objective: Recognize the  principles  of  forklift operations. 6-47. What  simple  principle  does  a forklift  operate  on? 1. Leverage 2. Fulcrum 3. Elevation 4. Lifting 6-48. What part of the forklift performs as  the  fulcrum? 1. The  counterweight 2. The drive axle 3. The  hoist  cylinder 4. The forks 6-49. To  develop  the  skills  required for  safe  and  efficient  forklift operations, you must have an understanding  of  which  of  the following  characteristic  of  a forklift? 1. Makeup 2. Capabilities 3. Limitations 4. All of the above 6-50. On most forklifts, the center of balance  (C/B)  is  at  what  location? 1. Above the rear axle 2. Above the front axle 3. Under the operator’s seat 4. Under  the  engine  compartment 1. True 2. False 44







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.