TM 55-2815-574-24
0063
REMOVE Continued
13. On the front of engine, remove six cap screws (22) and lock washers (23) from each front cam bearing (24).
23
24
22
25
24
23
22
NOTE
Only the left cam bearing has a gasket.
14. Remove two bearings (24) and gasket (25).
END OF TASK
DISASSEMBLE
NOTE
This procedure is typical for both camshafts.
1. Remove nut (9) securing gears (4 and 8) to camshafts (10 and 11).
26
10
11
28
27
28
4
8
2.
Remove cam gears (4 and 8) using universal puller kit.
3.
Remove woodruff key (26) from camshaft (10 and 11).
4.
Remove end (rear) bearings (27) and trust washers (28) from camshafts (10 and 11).
0063-5