TM 55-2815-574-24
0063
INSTALL Continued
27. Position two retainers (3 and 7) on cam shaft gears (4 and 8).
4
3
9
2
1
7
8
5
6
28. Position two adaptors (2 and 6) on retainers (3 and 7).
29. Install eight screws (1 and 5) securing adaptors and retainers to cam gear.
30. Using torque wrench, torque screws (1 and 5) to 480 ft lbs (54 N-m).
NOTE
If measurement exceeds specified limits, the camshaft (10) must be replaced.
31. Using a feeler gauge verify the clearance between thrust washer (28) and the shoulder of the camshaft (10) is
between 0.004 in. to 0.018 in.
28
10
0063-13