TM 55-2815-574-24
0054
INSTALLATION
1.
Install spring seat (Figure 1, Item 5), spring (Figure 1, Item 6), retainer (Figure 1, Item 7), and hex nut
(Figure 1, Item 8) on push rod (Figure 1, Item 4).
2.
Tighten hex nut (Figure 1, Item 8).
3.
Install new retaining ring (Figure 1, Item 2) in cylinder head (Figure 1, Item 1).
4.
Install push rod (Figure 1, Item 3) assembly in cylinder head (Figure 1, Item 1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install cylinder head cam follower (WP 0053).
2.
Install cylinder head valve guide bridge (WP 0058).
3.
Install cylinder head poppet valve rocker arm (WP 0049).
4.
Install cylinder head fuel manifold (WP 0051).
END OF TASK
END OF WORK PACKAGE
0054-3/blank