TM 55-2815-574-24
0120
DISASSEMBLY
WARNING
Do not allow any oil/fuel to drip onto deck. Failure to comply may result in
personnel injury.
Accidental or intentional introduction of liquid contaminants into the environment
may result in a violation of state, federal, and military regulations. Refer to local
environmental office for information concerning storage, use, and disposal of
these liquids. Failure to comply may cause damage to environment and health
of personnel. Seek medical attention in the event of injury.
1.
Remove eight self-locking bolts (Figure 1, Item 3) securing oil pump gear retaining plate (Figure 1, Item 2) to
crankshaft front cover (Figure 1, Item 1).
2.
Remove retaining plate (Figure 1, Item 2).
Figure 1. Oil Pump Gear Retaining Plate.
3.
Remove oil pump driven gear (Figure 2, Item 2) and hub (Figure 2, Item 3).
4.
Remove driven gear and bushing (Figure 2, Item 4) and shaft (Figure 2, Item 5).
END OF TASK