Sticking valves, 3-18
Strain/deflection gauge, 2-5
Stroboscope, 2-6
Submerged-tube plants, 8-2 to 8-6
air ejector, 8-5
brine density, 8-6
first-effect tube nest vacuum, 8-3
improper venting of evaporator tube nests, 8-4
last-effect shell vacuum, 8-4
proper water levels, 8-4
scale deposits on evaporator tubes, 8-4
Systems, air compressed, 6-1 to 6-5
high-pressure, 6-4
low-pressure, 6-1
medium-pressure, 6-3
T
Tag-out logs, 1-11
Tapers, 9-19
Thermostatic expansion valves, 5-7
Torque, 2-6
Training, 1-20 to 1-22
programs, 1-22
responsibilities, 1-20
safety, 1-21
Troubleshooting gasoline engines, 3-43 to 3-46
engine cranks but fails to start, 3-44
engine fails to stop, 3-45
starter does not run, 3-43
starter motor operates but does not crank engine,
3-44
Troubleshooting internal-combustion engines, 3-22 to
3-42
electric start malfunction, 3-27
Troubleshooting internal-combustion engines
Continued
engine cranks but fails to start, 3-27
engine hunts or will not stop, 3-35
engine overspeeds, 3-35
engine stalls frequently or stops suddenly, 3-30
engine will not carry a load, 3-35
irregular engine operation, 3-30
Turning, 9-17 to 9-19
boring, 9-18
finish turning, 9-18
rough turning, 9-17
turning to a shoulder, 9-18
Two-position dual control (2PD). 5-11
U
Unloader mechanism, 5-1
V
Valves, inspecting, testing, and repairing, 3-8 to 3-12
bent valves, 3-8
broken valve heads, 3-11
broken valve springs, 3-10
burned valves, 3-8
cam followers and lash adjusters, 3-12
loose valve seats, 3-9
pitting, 3-9
rocker arms and pushrods, 3-12
sticking valves, 3-8
weak springs, 3-8
worn valve keepers and retaining washers, 3-11
W
Watch standing, 1-25
INDEX-5