6-63.
What type of loader bucket is
more versatile because it has
a two-piece construction?
1.
Perforated
2.
General purpose
3.
Multipurpose
4.
Solid plate
6-64.
A multipurpose bucket can be used
to perform the same operations as
which of the following types of
equipment?
1.
Clamshell
2.
Dozer
3.
Scraper
4.
All of the above
6-65.
Techniques of operation and safety
rules for forklifts must be
followed when operating a loader
with a forklift attachment.
1.
True
2.
False
Learning Objective:
Recognize
the techniques of front-end
loader operation.
6-66.
Which of the following problems is
caused by spinning the tires while
loading with a rubber-tired FEL?
1.
Ruts in working area
2.
Wear and tear on the machine
3.
Lost production
4.
All of the above
6-67.
Which of the following results is
produced when you cross a ditch
with a loader at an angle?
1.
Slows the fall
2.
Lessens the danger of
upsetting the loader
3.
Reduces the jolt of
the fall
4.
All of the above
6-68.
An unsafe condition exists on a
construction project.
What person
has the responsibility to give an
emergency stop hand signal?
1.
The project supervisor
2.
The equipment signalman
3.
Any person in the vicinity
4.
The project crew leader
6-69.
What is the function of the 515 B
series dresser automatic bucket
leveler?
1.
Automatically raises the bucket
when fully loaded
2.
Automatically positions the
bucket in a horizontal position
3.
Automatically positions the
bucket in a vertical position
4.
Automatically dumps the bucket
when positioned over a dump
truck
6-70.
Most frontend loaders are equipped
with a total of how many bucket
control lever positions?
1.
Four
2.
TWO
3.
Six
4.
Eight
6-71.
When the multipurpose bucket is set
up for scraper operations, the more
the clamshell is closed the deeper
a cut can be made.
1.
True
2.
False
6-72.
When using the multipurpose bucket
as a dozer blade, you adjust the
amount of cut made by the dozer
blade by taking what action?
1.
Raising and lowering
the blade
2.
Opening and closing
the clamshell
3.
Adjusting the pitch
of the blade
4.
Putting the bucket
control lever in float
46