APPENDIX V
REFERENCES USED TO DEVELOP
THE TRAMAN
Chapter 1
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sec. C.
Walker, John R., Machining Fundamentals, Goodheart-Wilcox Company, Inc.,
South Holland, Ill., 1989, Chap. 4.
Chapter 2
Anderson, James, and Tatro, Earl E., Shop Theory, 6th ed., McGraw-Hill Book
Company, New York, 1974, Chap. 19.
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sets. C, E, and F.
McCarthy, Willard J., and Repp, Victor E., Ed.D., Machine Tool Technology,
Bennett and McKnight, Encino, Calif., 1984, Sec. 3.
Walker, John R., Machining Fundamentals, Goodheart-Wilcox Company, Inc.,
South Holland, Ill., 1989, Chap. 4.
Chapter 3
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sec. D.
Structural Repair, NAVSEA 59100-AB-GTP-010, Naval Sea Systems Command,
Washington, D.C., 1982.
Walker, John R., Machining Fundamentals, Goodheart-Wilcox Company, Inc.,
South Holland, Ill., 1989, Chap. 21.
Chapter 4
DoAll Power Saw Instruction Manual, DoAll Company, Des Plaines, Ill., 1971.
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sets. G and H.
McCarthy, Willard J., and Repp, Victor E., Ed.D., Machine Tool Technology,
Bennett and McKnight, Encino, Calif., 1984, Sec. 8.
Chapter 5
How to Run a Lathe, Rev. ed. 56, South Bend Lathe, South Bend, Ind., 1966.
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sec. F.
AV-1