Walker, John R., Machining Fundamentals, Goodheart-Wilcox Company, Inc.,
South Holland, Ill., 1989, Chap. 13.
Chapter 6
How to Run a Lathe, Rev. ed. 56, South Bend Lathe, South Bend, Ind., 1966.
McCarthy, Willard J., and Repp, Victor E., Ed.D, Machine Tool Technology, Bennett
and McKnight, Encino, Calif., 1984, Sets. 4 and 9.
Oberg, Erik, et al., Machinery's Handbook, 23d ed., Industrial Press Inc., New York,
1988, pp. 1475-1648.
Chapter 7
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sets. J through L.
Walker, John R., Machining Fundamentals, Goodheart-Wilcox Company, Inc.,
South Holland, Ill., 1989, Chap. 12.
Chapter 8
Equipment Manual for Lathe, Turret, Vertical, NAVSEA 0991-LP-125-7010, Naval
Sea Systems Command, Washington, D.C. 1968.
Moltrecht, K. H., Machine Shop Practice, Vol. 2, Industrial Press Inc., New York,
1981, Chap. 10.
Chapter 9
Model ITF-V, Operating Instructions, New Hermes Inc., Decater, Ga.
Moltrecht, K. H., Machine Shop Practice Vol. 2, Industrial Press Inc., New York,
1981, Chaps. 1 through 3.
Chapter 10
Kibbe, Richard R., et al., Machine Tool Practices, 3d ed., John Wiley and Sons,
New York, 1987, Sec. N.
Moltrecht, K. H., Machine Shop Practice, Vol. 2, Industrial Press Inc., New York,
1981, Chap. 14.
Chapter 11
Seames, Warren S., Computer Numerical Control: Concepts and Programming, 2d
ed., Delmar Publishers Inc., Albany, N.Y., 1990.
Thyer, G. E., Computer Numerical Control of Machine Tools, 2d ed.,
Butterworth-Heinemann LID, Oxford, England, 1991.
Chapter 12
Brush Electroplating on Marine Machinery, MIL-STD-2197 (SH), Naval Sea
Systems Command, Washington, D.C., 1989.
AV-2