TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
FUEL FILTER MOUNTING BRACKET REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
General mechanic's tool kit
TM 55-1925-205-10
(WP 0179, Table 1, Item 130)
Equipment Condition
Personnel Required
Fuel filter cartridge removed (WP 0079)
Engineer 88L
Fuel filter adapter removed (WP 0083)
REMOVAL
1.
Remove two capscrews (Figure 1, Item 3) from mounting bracket (Figure 1, Item 1).
2.
Remove bracket (Figure 1, Item 1) from exhaust manifold (Figure 1, Item 2) and discard.
END OF TASK
INSTALLATION
1.
Position new bracket (Figure 1, Item 1) on exhaust manifold (Figure 1, Item 2).
2.
Install two capscrews (Figure 1, Item 3) on bracket (Figure 1, Item 1).
3.
Tighten capscrews (Figure 1, Item 3).
Figure 1. Fuel Filter Mounting Bracket.
END OF TASK