TM 55-2815-574-24
0134
INSTALLATION
1.
Install new gasket (Figure 3, Item 14) on new heat exchanger core (Figure 3, Item 13).
2.
Position heat exchanger core (Figure 3, Item 13) with gasket (Figure 3, Item 14) in expansion tank
(Figure 3, Item 6).
3.
Install new gasket (Figure 3, Item 5) and outlet cover (Figure 3, Item 4) on expansion tank (Figure 3, Item 6).
4.
Install 14 bolts (Figure 3, Item 16) with lockwashers (Figure 3, Item 15).
5.
Install four new O-rings (Figure 3, Item 3) and two new packing retainers (Figure 3, Item 17) into outlet
flange (Figure 3, Item 2).
6.
Install outlet flange (Figure 3, Item 2) on outlet cover (Figure 3, Item 4).
7.
Secure outlet flange (Figure 3, Item 2) with six bolts (Figure 3, Item 19) and new lockwashers
(Figure 3, Item 18).
8.
Install outlet hose/tube assembly (Figure 3, Item 20) with hose clamp (Figure 3, Item 1) to outlet flange
(Figure 3, Item 2).
9.
Install new gasket (Figure 3, Item 12) on heat exchanger inlet cover (Figure 3, Item 11).
10.
Position heat exchanger inlet cover (Figure 3, Item 11) with gasket (Figure 3, Item 12) on expansion
tank (Figure 3, Item 6).
11.
Install raw water inlet hose/tube assembly (Figure 3, Item 10) with hose clamp (Figure 3, Item 9) on heat
exchanger inlet cover (Figure 3, Item 11).
12.
Install 14 bolts (Figure 3, Item 8) and new lockwashers (Figure 3, Item 7) to heat exchangers inlet cover
(Figure 3, Item 11).
13.
Tighten hose clamps (Figure 3, Item 1 and 9).
0134-4