TM 55-2815-574-24
0149
ASSEMBLE
WARNING
Lubricating oil may cause irritation to eyes or skin. In case lubricating oil comes in contact with eyes
or skin, immediately flush eyes with water, wash skin with soap and water. Wear protective goggles,
gloves, and clothing. Failure to comply may result in personnel injury or death.
1.
Lubricate the inner race of the new outer bearing (15) and new inner bearing (16) with grease.
12
10
15
16
17
2.
Lubricate the bearing surface of the new shaft (10) with grease.
3.
Place end of shaft (10) into gear installer (17).
4. Place new inner bearing (16) on shaft (10).
5. Using arbor press and a brass drift (11), press inner bearing (16) onto shaft (10).
6.
Place new outer bearing (15) on end of shaft (10).
7.
Using arbor press, brass drift (12) and gear installer (17), press new outer bearing (15) onto shaft (10).
8.
Remove shaft (10) from gear installer (17).
0149-6