TM 55-2815-574-24
0149
DISASSEMBLE - Continued
WARNING
Flying particles and debris are present. Wear protective goggles. Failure to comply
may result in personnel injury or death.
NOTE
To assist in the removal of the retaining ring, a small screwdriver may be used for the
removal with the retaining ring pliers.
Using retaining ring pliers, slide pliers into slot of gear (2) and disengage retaining ring (3) from shaft of pump (1).
3.
3
2
1
4. Remove five bolts (4) securing pump cover (5) to pump (1).
1
6
5
4
5. Remove pump cover (5) and gasket (6). Discard gasket (6).
CAUTION
While holding gear during the following steps, care should be exercised to prevent
damage to teeth on gear.
6.
While holding gear on back side of pump (1) remove lock nut (7) and washer (8).
0149-2