TM 55-2815-574-24
0063
INSTALL - Continued
6.
Push cam gears (4 and 8) all the way into place so that the cam gears, the idler gear and the crankshaft gear are
fully meshed.
7.
Check the timing and correct as necessary.
NOTE
In order to install rear bearing screws it will be necessary to rotate the camshaft gears.
8.
Turn camshaft gears (4 and 8) to reach all rear bearing screw holes.
9.
Install six screws (19) and lock washers (20) into both rear bearings (27).
4
21
26
20
8
19
26
20
19
10. Using torque wrench, torque screws (19) to 480 in. lbs (54 N-m).
11. Align holes in six intermediate bearings (30) on camshafts (10 and 11) with threaded holes in the engine block
(21).
10 (HIDDEN)
21
18
11
30
0063-10