TM 55-2815-574-24
0092
ADJUSTMENT - Continued
NOTE
Flat side of injector gauge needs to face injector follower.
3.
Insert injector gauge (Figure 3, Item 2) in timing hole at top of injector (Figure 3, Item 1).
4.
Loosen locknut (Figure 3, Item 4) on injector rocker arm push rod (Figure 3, Item 5).
5.
Rotate push rod (Figure 3, Item 5) to adjust rocker arm (Figure 3, Item 3) until flat side of gauge moves just
over top of injector follower (Figure 3, Item 6).
6.
Remove injector gauge (Figure 3, Item 2) and tighten locknut (Figure 3, Item 4) while securing push rod
(Figure 3, Item 5).
7.
Using injector gauge (Figure 3, Item 2), verify timing.
8.
Adjust timing on remaining seven fuel injectors (Figure 3, Item 1) in same manner.