TM 55-2815-574-24
0091
INSTALL - Continued
6. Slide injector rack control lever (3) into injector control rack (4).
CAUTION
Make sure clamp does not interfere with injector follower spring or
exhaust valve spring.
7.
Install clamp (7), bolt (5) and convex washer (6) securing injector (8).
5
6
7
8
4
9.
Using torque wrench and socket set, torque bolt (5) to 240 - 300 in. lbs (27-34 N-m).
10. Check injector control rack (4) for free movement. If injector control rack is sticking or binding, loosen bolt (5).
11. Using torque wrench and socket set, torque bolt (5) to 240 - 300 in. lbs (27-34 N-m).
12. Install cylinder head poppet valve rocker arms. (WP 0048 00)
13. Install fuel manifolds. (WP 0050 00)
14. Install cylinder head poppet valve rocker arm covers. (WP 0043 00)
15. Install air inlet collector assembly. (WP 0104 00)
16. Install crankcase breather limiter assembly. (WP 0106 00)
17. Install powered section engine hatch. (TM 55-1945-205-24-3-1)
18. Install operators cab. (TM 55-1945-205-24-3-1)
0091-5