TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
WARPING TUG
FUEL INJECTOR ASSEMBLY
REMOVAL, CLEANING, INSPECTION AND INSTALLATION
INITIAL SETUP:
Tools
Tool Kit, General Mechanic's (WP 0179, Table 1, Item 130)
Wrench, Torque (150-750 in. lbs) (WP 0179, Table 1, Item 142)
Wrench Set, Socket (3/8 in. sqdr.) (WP 0179, Table 1, Item 135)
Goggles, Industrial (WP 0179, Table 1, Item 54)
Hose Assembly, Non-metallic (WP 0179, Table 1, Item 66)
Materials/Parts
Grease, Automotive and Artillery (WP 0178, Table 1, Item 20)
Personnel Required
Engineer 88L
References
TM 55-1925-205-10
Equipment Condition
Engine Cool To Touch.
SINCGARS Antenna Removed. (TM 11-5820-890-10-8)
Main Navigation Mast Removed. (TM 55-1925-205-23)
Intake Plenum Assembly Removed. (TM 55-1925-205-23)
Operators Cab Removed. (TM 55-1925-205-23)
Powered Section Engine Hatch Removed. (TM 55-1925-205-23)
Cylinder Head Poppet Valve Rocker Arm Covers Removed. (WP 0044 00)
Cylinder Head Poppet Valve Rocker Arms Removed. (WP 0049 00)
REMOVE
NOTE
This procedure is typical for removal and installation of all injectors in both the port and
starboard engines.
1.
Loosen retaining nut (1) and injector control rack lever adjusting screw (2).
0091-1