TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
CYLINDER HEAD FUEL MANIFOLD REMOVAL, CLEANING, INSPECTION, AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
References
General mechanic's tool kit
TM 55-1925-205-10
(WP 0179, Table 1, Item 130)
Chemical gloves (WP 0179, Table 1, Item 52)
Equipment Condition
Industrial goggles (WP 0179, Table 1, Item 54)
Engine cool to touch
Ratcheting torque wrench, dial, 3/8-in. drive,
Single channel ground and airborne radio system
10-250 in-lb (34 Nm)
(SINCGARS) antenna removed
(WP 0179, Table 1, Item 141)
(TM 11-5820-890-10-8)
Reciprocating compressor unit power drive
Main navigation mast removed
(WP 0179, Table 1, Item 27)
(TM 55-1925-205-23)
(
Socket wrench set, 3/8 in. sqdr.
Intake plenum assembly removed
WP 0179, Table 1, Item 135)
(TM 55-1925-205-23)
Torque wrench, 150750 in-lb (1785 Nm)
Operator's cab removed (TM 55-1925-205-23)
(WP 0179, Table 1, Item 142)
Powered section module engine hatch removed
Utility apron (WP 0179, Table 1, Item 8)
(TM 55-1925-205-23)
Crankcase breather limiter assembly removed
Materials/Parts
Cleaner (WP 0178, Table 1, Item 8)
Air inlet collector assembly removed (WP 0104)
Nonmetallic seal (WP 0180, Table 1, Item 116)
Cylinder head poppet valve rocker arm cover
removed (WP 0044)
Personnel Required
Engineer 88L
0051-1