TM 55-2815-574-24
0043
DISASSEMBLE - Continued
70. Remove reducing bushing (20) and ether starting aid thermostat (21).
71. Remove two plugs (22).
72. Remove reducing bushing (23) and elbow (24).
73. Remove oil plug (25).
74. Remove drain cock (26).
75. Remove elbow (27), reducing bushing (28) and fitting (29).
76. Remove two hex head screws (30), lock washers (31), flat washers (32) and starter motor bracket (33).
77. Remove core plug (34) and gasket (35) from top of engine block (4) using core plug remover/installer.
Discard gasket.
INLET ADAPTER
CORE PLUG
REMOVER
38
37
35
4
36
34
78. Remove aftercooler water inlet adaptor (36) and gasket (37) using aftercooler water inlet adaptor remover.
Discard gasket.
79. Remove oil galley plugs (38).
80. Remove four hex head screws (39), washers (40), cover plate (41) and gasket (42) from left side of engine
block (4). Discard gasket.
0043-6