TM 55-2815-574-24
0043
INSPECT
1.
Inspect cylinder bore (51), grooves (52) and lands (53) for pitting and corrosion. None Allowed.
4
51
52
53
NOTE
All eight cylinders are measured in the same manner. Repeat the following step and
substeps for each cylinder.
2.
Measure cylinder bore (51) diameter on X and Y axis using a cylinder bore gauge.
CYLINDER
BORE GAGE
51
4
Position A diameter shall not exceed 5.3625 in. (136.2075 mm). b.
Position B diameter shall not
a.
exceed 5.3390 in. (135.6106 mm).
0043-10