0043
TM 55-2815-574-24
CLEAN
WARNING
Flying particles and debris are present. Wear protective goggles. Failure to comply mayresult in personnel
injury or death.
Cleaning compound may cause irritation to the eyes or skin. Use in well-ventilated areas. Wear protective
goggles and clothing. In case cleaning compound comes in contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury.
Use caution when cleaning cylinder head with hot water or steam. Wear protective goggles and clothing.
Failure to comply may result in personnel injury or death.
1.
Clean gasket material and sealant off engine block (4) surfaces using scraper.
2.
Clean engine block (4) using cleaning compound solution, making sure oil and water galleries are cleaned
thoroughly.
3.
Rinse engine block (4) with clear water or steam clean.
WARNING
Do not exceed 30 PSI when using compressed air for cleaning. Failure to comply could result in
injury to personnel.
4.
Dry engine block (4) thoroughly with compressed air.
0043-9