TM 55-2815-574-24
0072
REMOVAL - Continued
27.
Use slings, shackles, and crane to remove flywheel housing (Figure 10, Item 4) from the back end of engine
(Figure 10, Item 2).
28.
Remove gasket (Figure 10, Item 3) from engine rear end plate (Figure 10, Item 1) and discard.
WARNING
Flying particles and debris are present. Wear protective goggles. Failure to comply may
result in personnel injury or death.
29.
Use a putty knife to clean gasket residue from rear end plate (Figure 10, Item 1) and flywheel housing
(Figure 10, Item 4).
Figure 10.