TM 55-2815-574-24
0099
REMOVAL - Continued
3.
Loosen six screws (Figure 2, Item 11) and rotate six clamps (Figure 2, Item 1) securing cover
(Figure 2, Item 10) to enclosure (Figure 2, Item 6).
4.
Open cover (Figure 2, Item 10).
5.
Remove four screws (Figure 2, Item 8) from panel (Figure 2, Item 7).
6.
Remove panel (Figure 2, Item 7) from enclosure (Figure 2, Item 6).
7.
Cut tiedown straps securing electrical wires (Figure 2, Item 9). Discard tiedown straps.
8.
Disconnect and tag all electrical wires (Figure 2, Item 9) from governor controller (Figure 2, Item 2).
NOTE
In order to gain access to nuts securing the governor controller, it will be necessary to pull
downward on the top of the panel.
9.
Remove four pan head screws (Figure 2, Item 3), washers (Figure 2, Item 4) and insert nuts
(Figure 2, Item 5) securing governor controller (Figure 2, Item 2) to panel (Figure 2, Item 7).
10.
Remove governor controller (Figure 2, Item 2).
END OF TASK
INSTALLATION
1.
Apply antiseize compound to threads of screws (Figure 2, Items 3, 8, and 11).
2.
Install new governor controller (Figure 2, Item 2).
3.
Secure governor controller (Figure 2, Item 2) with four pan head screws (Figure 2, Item 3), washers
(Figure 2, Item 4), and insert nuts (Figure 2, Item 5).
4.
Install panel (Figure 2, Item 7) in enclosure (Figure 2, Item 6).
5.
Secure panel (Figure 2, Item 7) with four screws (Figure 2, Item 8).
6.
Connect electrical wiring (Figure 2, Item 9) as tagged to governor controller (Figure 2, Item 2).
7.
Secure loose electrical wiring (Figure 2, Item 9) with tiedown straps.
0099-2