TM 55-2815-574-24
0106
REMOVAL - Continued
5.
Remove six hose clamps (Figure 1, Item 1) from hoses (Figure 1, Item 2).
END OF TASK
INSPECTION
1.
Inspect clamps (Figure 1, Item 1) for stretching, distortion, or damage. Replace damaged parts.
2.
Inspect hoses (Figure 1, Item 2) for wear, cuts, and dry rotting. Replace damaged parts.
3.
Inspect tube (Figure 1, Item 4) for cracks, dents, or damage. Replace damaged parts.
END OF TASK
INSTALLATION
1.
Install six hose clamps (Figure 1, Item 1) on hoses (Figure 1, Item 2).
2.
Install three hoses (Figure 1, Item 2) on tube (Figure 1, Item 4).
3.
Connect hoses (Figure 1, Item 2) and tube (Figure 1, Item 4) to air inlet collector (Figure 1, Item 3) and
crankcase breather (Figure 1, Item 5).
4.
Install new limiter assembly (Figure 1, Item 6).
5.
Tighten six hose clamps (Figure 1, Item 1).
END OF TASK
FOLLOW-ON MAINTENANCE
Perform operational check of diesel engine (TM 55-1925-205-10).
END OF TASK
END OF WORK PACKAGE
0106-2