TM 55-2815-574-24
0152
INSTALLATION
1.
Wrap new zinc anode (Figure 3, Item 1) threads with antiseizing tape.
2.
Install zinc anode (Figure 3, Item 1) into marine gear cooler (Figure 3, Item 2).
3.
Tighten zinc anode (Figure 3, Item 1).
4.
Verify butterfly value (Figure 2, Item 1) on seachest is on.
Figure 3. Zinc Anode.
5.
Remove LO/TO from A3 breaker switch. Refer to FM 4-01.502 for LO/TO procedure.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Start engine (TM 55-1925-205-10).
2.
Start the bilge pumps to remove raw water from bilge (TM 55-1925-205-10).
3.
Stop the engine (TM 55-1925-205-10).
END OF TASK
END OF WORK PACKAGE