TM 55-2815-574-24
0156
DISASSEMBLY - Continued
Figure 5. Slinger and Bearing Seal.
19.
Using arbor press (Figure 6, Item 2) and brass drift (Figure 6, Item 1), remove bearing (Figure 6, Item 4)
from shaft (Figure 6, Item 3).
Figure 6. Bearing.
20.
Remove slotted screw (Figure 7, Item 4) from cam (Figure 7, Item 3) and remove cam.
21.
Lift wear plate (Figure 7, Item 2) off dowel in housing (Figure 7, Item 1).