TM 55-2815-574-24
0156
DISASSEMBLY
1.
Remove five hex head screws (Figure 1, Item 7) from cover (Figure 1, Item 6) and gasket (Figure 1, Item 5).
2.
Remove cover (Figure 1, Item 6) and gasket (Figure 1, Item 5). Discard gasket.
NOTE
Spline plugs will come out with impeller.
3.
Remove plate (Figure 1, Item 4).
4.
Using two pliers, grasp a blade on each side of impeller (Figure 1, Item 2) and pull impeller from shaft
(Figure 1, Item 1).
5.
Remove spline plugs (Figure 1, Item 3) from impeller (Figure 1, Item 2).
6.
Discard spline plugs (Figure 1, Item 3).
Figure 1. Raw Water Pump.