TM 55-2815-574-24
0155
INSTALLATION
1.
Position raw water pump (Figure 4, Item 3) and new gasket (Figure 4, Item 2) on flywheel housing
adapter (Figure 4, Item 1).
2.
Install six hex head bolts (Figure 4, Item 4) to secure raw water pump (Figure 4, Item 3) to flywheel housing
adapter (Figure 4, Item 1).
3.
Tighten hex head bolts (Figure 4, Item 4).
Figure 4. Raw Water Pump.
4.
Position pump inlet tube (Figure 5, Item 5) and new gasket (Figure 5, Item 6) on raw water pump.
5.
Install four hex head bolts (Figure 5, Item 3) and lockwashers (Figure 5, Item 4) through inlet
tube (Figure 5, Item 5) and gasket (Figure 5, Item 6).
6.
Tighten hex head bolts (Figure 5, Item 3).
7.
Position outlet elbow (Figure 5, Item 8) and gasket (Figure 5, Item 7) on raw water pump.
8.
Install four hex head bolts (Figure 5, Item 2) and lockwashers (Figure 5, Item 1) through outlet elbow
(Figure 5, Item 8) and gasket (Figure 5, Item 7) into raw water pump.