TM 55-2815-574-24
0157
REMOVAL - Continued
Figure 1. Water Inlet Tube.
7.
Remove six nuts (Figure 2, Item 5) and lockwashers (Figure 2, Item 6) from studs (Figure 2, Item 3).
8.
Remove turbocharger flange adapter (Figure 2, Item 1) from exhaust manifold (Figure 2, Item 2).
9.
Remove gasket (Figure 2, Item 4) from exhaust manifold (Figure 2, Item 2). Discard gasket.
Figure 2. Turbocharger Flange.
NOTE
Leave nut and washer on center stud until all other nuts and washers have been removed.
10.
Remove five bolts (Figure 3, Item 3) and beveled washers (Figure 3, Item 5) that secure exhaust manifold
(Figure 3, Item 2) to cylinder head (Figure 3, Item 1).
11.
Remove exhaust manifold (Figure 3, Item 2) from engine.
12.
Remove two manifold gaskets (Figure 3, Item 4). Discard gaskets.
END OF TASK