3-29. After  an  operational  readiness  inspec- tion,  one  purpose  of  supplying  the inspected  ship  with  copies  of  the inspector's  report  is  to  provide  the inspected  ship  with  a 1. checkoff  list  for  correcting  defects 2. statement  of  probable  action  by  the type  commander 3. schedule  for  future  overhaul  periods 4. statement  of  condition  of  material  in comparison  with  other  ships  in  the division 3-30. When evaluating the performance of an engineering  department  during  a  battle problem,    an  observer  checks  the  extent  to which the engineering department carries out  which  of  the  following  tasks? 3-31. 1. Exercises  engineering  casualty control  measures 2. Utilizes  damage  control  features built  into  the  ship 3. Maintains  maximum  mobility  and manueverability of the ship 4. All of the above The  specific  purpose  of  the  material inspection  is  to  determine  whether  the 1. ship's  machinery  is  kept  clean 2. cleanliness  of  a  ship's  compart- ments  meets  acceptable  standards 3. correct  procedures  are  being  used  in the  maintenance  of  machinery  and equipment 4. military  bearing  and  appearance of  a  ship's  personnel  have  improved materially  since  the  last  inspection 3-32. Which  of  the  following  types  of  inspec- tions is similar to the Board of Inspection  and  Survey  inspection? 3-34. A list of the units to be opened is furnished  to  the  ship  for  material inspection  by  the 1. type  commander 2. Board  of  Inspection  and  Survey 3. chief  inspector 4. individual   inspectors Question  3-35  is  to  be  judged  True  or False. 3-35. All  material  deficiencies  found  during  an inspection,  but  NOT  included  on  the Work List are noted as discrepancies by the  chief  inspector. 3-36. The  information  on  the  condition  sheets provided  to  the  inspection  party describes  the  condition  of 1. the  machinery  to  be  opened 2. the  machinery  to  be  tested 3. all parts of the ship, and all machinery  and  equipment  on  board 4. machinery  to  be  operated 3-37. The  preliminary  copies  of  the  condition sheets to be used for a material inspection  are  filled  in  by  the 3-38. 1. type  commander 2. division   commander 3. ship  that  conducts  the  inspection 4. ship  to  be  inspected Which of the following items should be entered  on  a  condition  sheet? 1. Machinery  to  be  opened  for  inspection 2. Equipment  to  be  operated 3. Material  condition  of  an  inoperative safety  device 4. All of the above 1. The  shipwide  administrative Question  3-39  is  to  be  judged  True inspection or False. 2. The   departmental   administrative inspection 3-39. Condition  sheets  describe  the  condition 3. The  material  inspection of  the  ship's  hull,  machinery,  and 4. The  operational  readiness  inspection equipment. Condition sheets are filled in  by  the  inspected  ship's  company Question 3-33 is to be judged True or False. 3-33. Unless  they  have  a  direct  bearing  on  the material   condition,   administrative methods  and  cleanliness  should  NOT  be considered  as  part  of  a  material inspection. and used by the inspection party as a checkoff  list  and  inspection  record during the inspection. After the inspection,  condition  sheets  are  used  in preparing  the  final  inspection  report  on the condition of the ship. 18