TM 55-2815-574-24
0149
DISASSEMBLE - Continued
1
10
9
8
7
7.
Install impeller puller onto impeller (9).
8.
Remove impeller (9) and discard.
CAUTION
Do not strike the gear teeth on the arbor press. Striking the teeth can result in damage to
the gear.
9.
Press the shaft (10) and pump gear (2) assembly out of the pump body (1).
12
1
11
10
2
a.
Position pump (1) on the bed of an arbor press (11) with threaded end of shaft (10) up.
b.
Using a brass drift (12) as a buffer between the arbor press and the threaded shaft (10), press the gear (2) and
shaft (10) from the pump body (1).
c.
Remove and discard retaining ring (3).
d.
Remove pump body (1) from bed of arbor press (11).
e.
Place the gear (2) on the bed of an arbor press (11) with the threads of the shaft (10) down.
0149-3