TM 55-2815-574-24
0036
STARBOARD AIR BOX COVERS INSTALLATION
WARNING
Sealing compound may cause irritation to the eyes or skin. Use in well-ventilated area.
Wear protective goggles and clothing. In case sealing compound comes in contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury.
1.
Coat two new single gaskets (Figure 1, Item 4) and one new double gasket (Figure 1, Item 2) with sealing
compound.
2.
Coat seven hex head screws (Figure 1, Item 6) with antiseize compound.
3.
Position air box drain covers (Figure 1, Items 1 and 5) and gaskets (Figure 1, Items 2 and 4) on side of
engine block (Figure 1, Item 3).
4.
Install seven hex head screws (Figure 1, Item 6) to secure air box drain covers (Figure 1, Items 1 and 5) and
gaskets (Figure 1, Items 2 and 4) to side of engine block (Figure 1, Item 3).
5.
Using torque wrench and socket set, torque screws (Figure 1, Item 6) to 96 to 144 in-lb (11 to 16 Nm).
6.
Install marine gear cooler (TM 55-2040-211-24).
END OF TASK
PORT AIR BOX COVERS INSTALLATION
WARNING
Sealing compound may cause irritation to the eyes or skin. Use in well-ventilated area.
Wear protective goggles and clothing. In case sealing compound comes in contact with:
Eyes, flush immediately with water.
Skin, wash with soap and water.
Failure to comply may result in personnel injury.
1.
Coat two new single gaskets (Figure 2, Item 6) and one new double gasket (Figure 2, Item 2) with sealing
compound.
2.
Coat seven hex head screws (Figure 2, Item 4) with antiseize compound.
3.
Position air box covers (Figure 2, Items 3 and 5) and gaskets (Figure 2, Items 2 and 6) on side of engine
block (Figure 2, Item 1).
4.
Install seven hex head screws (Figure 2, Item 4) to secure air box covers (Figure 2, Items 3 and 5) and
gaskets (Figure 2, Items 2 and 6) to side of engine block (Figure 2, Item 1).
5.
Using torque wrench, torque screws (Figure 2, Item 4) to 96 to 144 in-lb (11 to 16 Nm).
0036-4