TM 55-2815-574-24
0044
INSTALLATION
1.
Install strainer (Figure 1, Item 10) in cylinder head poppet valve rocker arm cover (Figure 1, Item 6) (left
rocker cover only).
2.
Install chain hook (Figure 1, Item 9) on strainer (Figure 1, Item 10).
3.
Install filler cap plug (Figure 1, Item 7) in cylinder head poppet valve rocker arm cover (Figure 1, Item 6).
4.
Rotate filler cap plug handle (Figure 1, Item 8) clockwise and tighten.
5.
Install new seal (Figure 1, Item 16) and breather housing (Figure 1, Item 2) on cylinder head poppet valve
rocker arm cover (Figure 1, Item 6).
6.
Position retainer (Figure 1, Item 12), breather element (Figure 1, Item 13), and retaining plate
(Figure 1, Item 14) on cylinder head poppet valve rocker arm cover (Figure 1, Item 6).
7.
Install screw (Figure 1, Item 15) in retaining plate (Figure 1, Item 14) and tighten.
8.
Install new gasket (Figure 1, Item 11) on cylinder head poppet valve rocker arm cover (Figure 1, Item 6).
9.
Install cylinder head poppet valve rocker arm cover (Figure 1, Item 6), two silicon isolators
(Figure 1, Item 5), washers (Figure 1, Item 4), and bolts (Figure 1, Item 3).
10.
Using torque wrench and socket set, torque bolts (Figure 1, Item 3) to 276 to 312 in-lb (31.19 to 35.26 Nm).
11.
Connect hose (Figure 1, Item 17) to breather housing (Figure 1, Item 2).
12.
Tighten hose clamp (Figure 1, Item 1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install engine air inlet collector assembly (WP 0104).
2.
Install crankcase breather limiter assembly (WP 0106).
3.
Install engine hatch (TM 55-1925-205-23).
4.
Install operator's cab (TM 55-1925-205-23).
5.
Install intake plenum assembly (TM 55-1925-205-23).
6.
Install main navigation mast (TM 55-1925-205-23).
7.
Install SINCGARS antenna (TM 11-5820-890-10-8).
8.
Perform operational check of diesel engine (TM 55-1925-205-10).
END OF TASK
END OF WORK PACKAGE
0044-4