TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
CAMSHAFT VIBRATION DAMPER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Main navigation mast removed
(WP 0179, Table 1, Item 130)
(TM 55-1925-205-23)
Torque wrench, 150750 in-lb (1785 Nm)
Powered section intake plenum or operator's cab
(WP 0179, Table 1, Item 142)
removed (TM 55-1925-205-23)
Rubber mallet (WP 0179, Table 1, Item 81)
Powered section engine hatch removed
Socket wrench set, 3/8 in. sqdr.
(TM 55-1925-205-23)
(WP 0179, Table 1, Item 135)
Fresh water cooling system drained (WP 0133)
Universal puller kit (WP 0179, Table 1, Item 100)
Alternator belt guard removed
(TM 55-1925-205-23)
Heat exchanger removed (WP 0134)
Materials/Parts
Forward lifting bracket removed (WP 0135)
Lockwasher (WP 0180, Table 1, Item 3)
Fresh water pump removed (WP 0147)
Engine lubricating oil, 30W
(WP 0178, Table 1, Item 25)
Camshaft vibration damper
(TM 55-1925-205-24P, 0201)
Personnel Required
Engineer 88L
References
TM 55-1925-205-10
Equipment Condition
Single channel ground and airborne radio system
(SINCGARS) antenna removed
(TM 11-5820-890-10-8)
0064-1