TM 55-2815-574-24
0072
INSTALLATION - Continued
16.
Apply ultra blue sealing compound to new gasket (Figure 19, Item 3).
17.
Install new gasket (Figure 19, Item 3) on flywheel housing (Figure 19, Item 1).
18.
Install access plate (Figure 19, Item 4) on flywheel housing (Figure 19, Item 1).
19.
Install cap screw (Figure 19, Item 5) through access cover (Figure 19, Item 4), flywheel housing
(Figure 19, Item 1), copper washer (Figure 19, Item 2) into hex nut (Figure 19, Item 1).
20.
Install three cap screws (Figure 19, Item 7) and new lockwashers (Figure 19, Item 6) through access plate
(Figure 19, Item 4) and into flywheel housing (Figure 19, Item 1).
21.
Install two cap screws (Figure 19, Item 8) and new lockwashers (Figure 19, Item 9) through access plate
(Figure 19, Item 4) and into flywheel housing (Figure 19, Item 1).
Figure 19.